Free Shipping On Orders Over $100

Titan Power Fitment Guide

Titan Power batteries 

Fit in majority of the AEG's currently on the market. 11.1v and 7.4v Nunchuck style batteries typically fit inside most crane stocks.

11.1v and 7.4v sticks typically fit inside buffer tubes or AK receivers, although length of the 11.1v is 200mm as these packs are a bit long for some devices it may restrict the use of the front 2 stock position.

11.1v and 7.4v bricks may suit some of the AK receivers and stocks they do provide 3d printed PEQ boxes.

It's very important to understand the space you have for your battery, and to read our descriptions for size so that fitment isn't an issue. Measure with a tape measure or calipers, or eyeball it with a ruler, to determine if you think it will fit in your device.

For more detailed size specifications, here's the in depth information:

11.1v Nunchucks- 
Size: 19.5mm (0.77in) thick, 132mm (5.2in) long... and 19.5mm (0.77in) thick, 66mm (2.6in) long... This battery is typically placed inside crane stocks, please measure your battery space prior to ordering if there is concern on fitment. 

11.1v Sticks-
Size: 19.5mm (0.77in) thick, 197mm (7.76in) long... This battery is typically placed inside buffer tubes or AK receivers. Please note that when in buffer tubes, it's common for the front two stock positions to not be able to be used, but the back 3 instead. For AK receivers, please check the width measurement inside your device against the specifications above prior to ordering if there is concern on fitment. 

11.1v Bricks- 
Size: 55mm (2.17in) thick, 70mm (2.76in) long, and 19mm (0.75in) tall... This battery is typically placed inside PEQ boxes or LMGs. Please note that it will not fit all PEQs or LMGs, measure your battery space prior to ordering if there is concern on fitment. Titan Power offers their own 3D-printed PEQ box if needed, it's not the prettiest but it functions well! 

7.4v Sticks- 
Size: 19.5mm (0.77in) thick, 132mm (5.2in) long... This battery is typically placed inside buffer tubes or crane stocks, please measure your battery space prior to ordering if there is concern on fitment. 

7.4v Bricks- 
Size: 56.5mm (1.44in) thick, 70mm (2.76in) long, and 19mm (0.75in) tall... This battery is typically placed inside PEQ boxes or LMGs. Please note that it will not fit all PEQs or LMGs, measure your battery space prior to ordering if there is concern on fitment. Titan Power offers their own 3D-printed PEQ box if needed, it's not the prettiest but it functions well!

 

We hope this information has helped you better understand if our batteries can fit in your device. With Titan Power, Gel Ballers can enjoy the key features of lithium ion from a quality and safe product: No puff, no memory, 2x-5x the capacity on average, no fade, and a warranty better than any other battery in existence.